Templat:Infobox airport

Dari Wikipedia bahasa Indonesia, ensiklopedia bebas
(Dialihkan dari Templat:Infobox Bandara)
Lompat ke: navigasi, cari
{{{nama}}}
{{{nativename}}}
[[Berkas:{{{image}}}|frameless|upright=1]]
{{{caption}}}
IATA: {{{IATA}}} · ICAO: {{{ICAO}}}
Informasi
Jenis bandara {{{tipe}}}
Ketinggian MDPL  kakim)
Koordinat {{{coordinates}}}
Landas pacu
Arah Panjang Permukaan
ft m
{{{r1-number}}} {{{r1-length-f}}} {{{r1-length-m}}} {{{r1-surface}}}
{{{r2-number}}} {{{r2-length-f}}} {{{r2-length-m}}} {{{r2-surface}}}
Helipad
Nomor Panjang Permukaan
ft m
{{{h1-number}}} {{{h1-length-f}}} {{{h1-length-m}}} {{{h1-surface}}}
{{{h2-number}}} {{{h2-length-f}}} {{{h2-length-m}}} {{{h2-surface}}}
Statistik ({{{stat-year}}})
{{{stat1-header}}} {{{stat1-data}}}
{{{stat2-header}}} {{{stat2-data}}}
{{{footnotes}}}
{{{embed}}}
Ketinggian MDPL {{{elevasi}}}
Landas pacu
Arah Panjang Permukaan
ft m
{{{sudut}}} {{{panjang_f}}} {{{panjang_m}}} {{{permukaan}}}
[lihat] [sunting] [versi terdahulu] [hapus singgahan] Ikon dokumentasi Dokumentasi templat

Deskripsi

Templat {{Infobox Bandara}} ini digunakan untuk menambahkan kotak informasi (infobox) bandara.

Penggunaan

{{Infobox Bandara
| name         =
| nativename   =
| nativename-a =
| nativename-r =
| image        =
| image-width  = <!-- jika kurang dari 200 -->
| caption      =
| image2       =
| image2-width = <!-- jika kurang dari 200 -->
| caption2     =
| IATA         =
| ICAO         =
| FAA          =
| TC           =
| LID          =
| GPS          =
| WMO          =
| type         =
| owner-oper   =
| owner        =
| operator     =
| city-served  =
| location     =
| hub          =
| focus_city   =
| opened       =
| closed       =
| passenger_services_ceased =
| built        = <!-- bandar udara militer -->
| used         = <!-- bandar udara militer -->
| commander    = <!-- bandar udara militer -->
| occupants    = <!-- bandar udara militer -->
| metric-elev  =
| elevation-f  =
| elevation-m  =
| coordinates  =
| latd =  | latm =  | lats =  | latNS = 
| longd=  | longm=  | longs=  | longEW=
| coordinates_type       =
| coordinates_region     =
| coordinates_notitle    =
| website                =
| image_map              =
| image_mapsize          =
| image_map_alt          =
| image_map_caption      =
| pushpin_map            =
| pushpin_label_position =
| pushpin_label          =
| pushpin_map_alt        =
| pushpin_mapsize        =
| pushpin_image          =
| pushpin_map_caption    =
| r1-number    =
| r1-length-f  =
| r1-length-m  =
| r1-surface   = <!-- sampai dengan r8 -->
| metric-rwy   =
| h1-number    =
| h1-length-f  =
| h1-length-m  =
| h1-surface   = <!-- sampai dengan h12 -->
| stat1-header =
| stat1-data   = <!-- sampai dengan stat4 -->
| stat-year    =
| footnotes    =
}}
{{end}}

Parameter

Semua parameter kecual nama ada pilihan.

Nama bandara

Parameter-parameter ini menjeleskan tentang nama bandara yang ditampilkan di bagian atas infobox.

Untuk bandara di Indonesia

name
Nama bandara dalam Bahasa Indonesia, seperti Bandar Udara Internasional Juanda atau Bandar Udara Internasional Ngurah Rai.
nativename
Nama bandara dalam Bahasa Inggris, seperti Juanda International Airport.
nativename-a
Tidak perlu diisi.
nativename-r
Tidak perlu diisi.

Selain bandara di Indonesia

name
The name of the airport in English, such as Warsaw Chopin Airport or Beijing Capital International Airport.
nativename
Airport name in a native language using Western characters (French, German, Spanish, etc.), such as Lotnisko Chopina w Warszawie. In such cases the native name should be in italics, see Wikipedia:Manual of Style/Text formatting#Foreign terms. Can also be used for two different names in the same language (see Region of Waterloo International Airport).
nativename-a
Airport name in a native language with non-Western characters (Chinese, Japanese, Korean, Arabic, etc.), such as 北京首都国际机场.
nativename-r
Use in conjunction with above for Romanized name of the airport, such as Běijīng Shǒudū Guójì Jīcháng. In such cases the Romanized name should be in italics, see Wikipedia:Manual of Style/Text formatting#Foreign terms.

Airport image

These parameters specify an airport photograph or logo which is displayed below the title. A second image can also be displayed below the first image by using the parameter names ending with a "2".

image / image2
The name of image file, such as Airport.png or Logo.gif (do not include the File: or Image: prefix).
image_alt / image2_alt
Alternative text for the images.
image-width / image-width2
The image width in pixels, i.e. 175 (defaults to 220 if not specified).
This should only be used for smaller images which would appear distorted when expanded to a width of 220px.
caption / caption2
Text displayed beneath the image. If left blank or omitted, a caption will not be displayed.
This should only be used for photographs that require an explanation; it should be omitted for airport logos and may be omitted for aerial photographs.

Airport codes

These parameters specify airport location identifiers which are displayed below the image (or below title if there is no image):

IATA
The airport's three character IATA location identifier. If omitted or left blank it will display as IATA: none.
ICAO
The airport's four character ICAO location identifier. If omitted or left blank it will display as ICAO: none.
FAA
The three or four character FAA location identifier for airports in the United States. If omitted or left blank, nothing is displayed.
TC
The three or four character Transport Canada location identifier for airports in Canada. If omitted or left blank, nothing is displayed.
LID
A location identifier for airports outside the US or Canada, if other than ICAO or IATA codes. If omitted or left blank, nothing is displayed.
GPS
A Global Positioning System code for the airport, if other than ICAO or IATA codes. If omitted or left blank, nothing is displayed.
WMO
The World Meteorological Organization five digit code for the weather station at the airport. If omitted or left blank, nothing is displayed.

Airport summary

These parameters specify airport details for the "Summary" section displayed below the airport codes.

type
Airport type should be one of the following: Public, Private, Military or Military/Public. Do not use Commercial, General or Civil.
owner-oper
If the airport is owned and operated by the same entity, use this in place of owner and operator.
owner
Name of the airport owner.
operator
Name of the airport operator, if not the owner.
city-served
If the airport is associated with a major city but actually located in a smaller town, list the major city here and the smaller town under location. This is not automatically linked, in order to allow multiple links if needed.
Example: city-served = [[Paris]]
Result: Paris
location
Name of the town or city where the airport is located. Do not put the airport's street address in this field. This is not automatically linked, in order to allow multiple links if needed.
Example: location = [[Orly]], [[France]]
Result: Orly, France
hub
If the airport serves as an hub list the airlines here. This is not automatically linked, in order to allow multiple links if needed.
Example: *[[British Airways]] *[[BMI (airline)|BMI]] *[[Virgin Atlantic Airways]]
Result:
focus_city
If the airport serves as a focus city, list the airlines here. See discussion at Wikipedia talk:WikiProject Airports#Focus Cities on pages.
elevation-f
Height above mean sea level, in feet.
elevation-m
Height above mean sea level, in metres.
website
External link to the airport's official website. See Wikipedia: External links#How to link for more information.
Example: website = [http://www.dfwairport.com/ www.dfwairport.com]
Result: www.dfwairport.com
opened
The date when the airport originally opened for commercial service.
Example: {{Start date|1989|09|22}}
Result: September 22, 1989
closed
The date when the airport closed, either temporarily or permanently, along with reason for closing (for presently closed airports only).
passenger_services_ceased
The date when passenger services to the airport ceased due to conversion of the airport for another use, along with the new use for the airport. Only for airports that previously had passenger services.

Military airports

These optional parameters provide additional information for military airports. The parameter names are based on those used in Templat:Infobox military structure. This allows the display of information from that template, without the need to include an additional infobox. See example 4 below.

built
The date when the structure was built, usually given in years.
used
The period during which the structure was in active military use, usually given in years.
commander
The current commanding officer, for structures currently in military use.
occupants
Any notable military units which occupy the structure.

Geographic coordinates

This template allows for the insertion of geographic coordinates in two different ways: you can either provide a complete {{Coord}} template in the coordinates parameter, or you can provide the individual coordinate components (degrees, minutes, seconds, etc.) in the separate parameters described below. The latter method also allows you to insert a pushpin map with an automatically-placed airport icon and label (see below).

If you use both methods, then the coordinates parameter will be used in the infobox.

coordinates
Latitude and Longitude of airport, specified using the {{Coord}} template. When entering the coordinates always ensure that the resultant map or image shows the airport. It is very easy to confuse "N" for "S" or "E" for "W". If used as shown below, this will also cause the airport to appear in Google Earth's Geographic Web Layer.
Example: coordinates = {{Coord|49|27|16|N|002|06|46|E|type:airport_region:FR|display=inline,title}}
Result: 49°27′16″LU 002°06′46″BT / 49,45444°LU 2,11278°BT / 49.45444; 2.11278
latd
Latitude degrees. Can also be used for decimal degrees.
latm
Latitude minutes. Omit or leave blank if latd has a decimal value.
lats
Latitude seconds. Omit or leave blank if latd has a decimal value.
latNS
Latitude North or South (enter N or S). Omit or leave blank if latd has a decimal value.
longd
Longitude degrees. Can also be used for decimal degrees.
longm
Longitude minutes. Omit or leave blank if longd has a decimal value.
longs
Longitude seconds. Omit or leave blank if longd has a decimal value.
longEW
Longitude East or West (enter E or W). Omit or leave blank if longd has a decimal value.
coordinates_type
Set the type parameter for the coordinates. If this parameter is omitted or left blank, the type will be set to airport. It is unlikely that you would need to change this.
coordinates_region
Set the region parameter for the coordinates. Use either a two character ISO 3166-1 alpha-2 country code or an ISO 3166-2 region code. For example, the United Kingdom is GB, and Ontario, Canada is CA-ON.
coordinates_notitle
By default the coordinates will be displayed both in the infobox and in the title of the article. If this parameter is set to a non-empty value, the coordinates will be displayed only in the infobox.

Maps

This template provides two ways to include a map: as a simple image, or using {{Location map}} and the coordinate parameters described above to automatically place a pushpin mark and label on a map.

Image map

Am image map can be displayed by providing a value for image_map. The remaining image_ parameters are optional.

image_map
The name of an image to use as a map, such as Airport_map.png (do not include the File: or Image: prefix).
image_mapsize
(optional) The width to display the image map, in pixels. Just the number, no "px". If omitted or left empty, defaults to 220.
image_map_alt
(optional) Alt text for the image map. If left blank or omitted, this defaults to same text used in image_map_caption (or Location of {{{name}}} if no caption.
image_map_caption
(optional) Caption to display below the image map. If left blank or omitted, a caption will not be displayed.

Location/pushpin map

A location map can be displayed by providing values for latd, longd, and pushpin_map. The remaining pushpin_ parameters are optional.

pushpin_map
The name of a location map as per Templat:Location map (eg. Indonesia or Russia). The coordinate fields (eg. latd and longd) position a pushpin mark and label on the map automatically.
pushpin_mapsize
(optional) The width to display the pushpin map, in pixels. Just the number, without "px". If omitted or left empty, defaults to 220.
pushpin_map_alt
(optional) Alt text for the pushpin map.
pushpin_map_caption
(optional) Caption to display below the pushpin map. If left blank or omitted, a caption will not be displayed.
pushpin_relief
(optional) Any non-blank value (yes, 1, etc.) will cause the template to display a relief map image, where available (see example 1). For additional information, see Templat:Location map#Relief parameter.
pushpin_image
(optional) Name of an alternative map image, which must have the same edge coordinates as the location map template specified via pushpin_map (see example 5). Do not include the File: or Image: prefix. For additional information, see Templat:Location map#AlternativeMap parameter.
pushpin_label
(optional) The text of the label to place next to the pushpin mark (see example 1). The default is the value of the name parameter.
pushpin_label_position
(optional) The position of the label on the pushpin map relative to the pushpin mark (see example 5). Valid values are left, right, top and bottom. This defaults to either left or right, depending on the coordinates of the marker and its position relative to the right border of the map image.
pushpin_mark
(optional) The name of an image to display as the pushpin mark (see example 5). The default is File:Airplane silhouette.svg ( Airplane silhouette.svg ).
pushpin_marksize
(optional) The size of the mark in pixels (see example 5). The default is 10. Do not include px, for example: pushpin_marksize = 8, not pushpin_marksize = 8px.

Infobox control

These parameters control how certain fields within the infobox are displayed.

metric-elev
Set to any value to display elevation in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first. This can be seen in example 1.
metric-rwy
Set to any value to display runway length in metric units (metres) before imperial/US units (feet); leave blank to display imperial/US units first. Examples 1 and 2 below show the runway length with metres first; example 3 and 4 show it with feet before metres.

Runways

These parameters specify details for each runway in the "Runways" section displayed below the summary. This can also be used to specify water landing areas for seaplanes (see Fairbanks International Airport). Parameters start with r1- for the first runway, r2- for the second runway, up to r8- for the eighth runway (if more are needed, leave a message on the talk page). Each airport should have at least one runway.

rn-number (r1-number, r2-number, ...)
The designation of the runway, normally two numbers like this → 02/20, 1st number is 18 lower than the 2nd. Where there are parallel runways an additional letter is added to each number, for example "L" for left, "R" for right and "C" for center. In certain cases a runway will only have one number when it can only be used in one direction. For airports in the United States the leading zero is not used and the designation should read 2/20.
rn-length-f (r1-length-f, r2-length-f, ...)
Runway length in feet.
rn-length-m (r1-length-m, r2-length-m, ...)
Runway length in metres.
rn-surface (r1-surface, r2-surface, ...)
Runway surface type, such as: Concrete, Asphalt, Gravel, Grass (or Turf), Dirt, Water, etc. Avoid the generic type "Paved" if possible.

Helipads

These parameters specify details for each helipad in the "Helipads" section displayed below the runways. Parameters start with h1- for the first helipad, h2- for the second helipad, up to h12- for the twelfth helipad (if more are needed, leave a message on the talk page). This section is optional and only appears if the h1- parameters are specified. See example 1 and example 3 below.

hn-number(h1-number, h2-number, ...)
The designation of the helipad. In the United States this is usually the letter "H" followed by a number, i.e. "H1", "H2", etc.
hn-length-f (h1-length-f, h2-length-f, ...)
Helipad length in feet.
hn-length-m (h1-length-m, h2-length-m, ...)
Helipad length in metres.
hn-surface (h1-surface, h2-surface, ...)
Helipad surface type, such as: Concrete, Asphalt, etc. Avoid the generic type "Paved" if possible.

Statistics

These parameters specify details for an optional "Statistics" section displayed below the runways and helipads. Parameters start with stat1- for the first statistic, stat2- for the second statistic, etc. This section only appears if the stat1- parameters are specified. See example 1 and example 3 below.

statn-header (stat1-header, stat2-header, ...)
A brief description of each statistic, such as Passengers or Aircraft operations.
statn-data (stat1-data, stat2-data, ...)
The data associated with the corresponding header.
stat-year
The calendar year for the statistics. This is displayed in parentheses after the word "Statistics" in the section header.

Footnotes

This parameter contains text for footnotes displayed at the bottom of the infobox.

footnotes
The most common use for this field is to give sources or references for the data displayed in the infobox. See the examples below.