Harus Laksana Guntur

Dari Wikipedia bahasa Indonesia, ensiklopedia bebas
Prof. Dr.Eng Harus Laksana Guntur, ST, M.Eng

Prof. Dr.Eng Harus Laksana Guntur, ST, M.Eng (lahir Pasuruan, 11 Mei 1975) adalah guru besar Fakultas Teknologi Industri dan Rekayasa Sistem Institut Teknologi Sepuluh Nopember (ITS). Beliau memiliki bidang keahlian Teknik Mesin, khususnya Rekayasa Peredam Getaran.

Pendidikan[sunting | sunting sumber]

Harus menyelesaikan pendidikan tingkat sarjana di jurusan Teknik Mesin Institut Teknologi Sepuluh Nopember (lulus 1998). Kemudian melanjutkan studi pascasarjana Master of Engineering, Department of Mechano-Micro Engineering, Tokyo Institute of Technology, Jepang (Lulus 2005). Setelah itu langsung menyelesaikan program Doctor of Engineering, Department of Mechano-Micro Engineering, Tokyo Institute of Technology, Jepang (Lulus 2007).

Karir[sunting | sunting sumber]

Harus mengawali karirnya di kampus sebagai Kepala Laboratorium Sistem Dinamis dan Vibrasi, Jurusan Teknik Mesin ITS (2012-2015) sekaligus Sekretaris Program Studi Pascasarjana (S2/S3), Jurusan Teknik Mesin, ITS (2012-2015).

Setelah itu ia menjabat sebagai Sekretaris Lembaga Penelitian dan Pengabdian Masyarakat (LPPM) ITS, (2015-2019), kemudian menjadi Kepala Lembaga Penelitian dan Pengabdian Masyarakat (LPPM) ITS, (Juli –Desember 2019).

Saat ini, Harus menjabat sebagai Kepala Program Studi Pascasarjana (S2/S3), Jurusan Teknik Mesin, ITS sejak tahun 2020 sampai sekarang.[1]

Kegiatan di Laboratorium RVSO

Prestasi[sunting | sunting sumber]

1. Ketua Ormawa-Robotika Jurusan Teknik Mesin, ITS (1995 - 1996)

2. Ketua LSM – Institute of Rural Development Indonesia (IRDI), Jepang (2005 - 2007)

3. Ketua LSM- Masyarakat Anti Korupsi (MASA), Jepang (2005 - 2007)

4. Ketua Persatuan Pelajar Indonesia, Tokyo Institute of Technology, Jepang (2004 -2005)

5. Ketua Bidang Pendidikan, Persatuan Pelajar Indonesia [PPI] Pusat, Jepang (2005 - 2007)

6. Anggota American Society of Mechanical Engineer [2] [ASME] (2020 - Sekarang)

7. Anggota Japan Society of Mechanical Engineer [JSME], Jepang (2005 - Sekarang)

8. Dewan Pakar, IKA ITS Jawa Timur (2023 - Sekarang)

9. Wakil Sekretaris Asosiasi Profesor Indonesia [API] (2023 - Sekarang)

10. Ketua Bidang Teknologi, Dewan Pimpinan Pusat, Ikatan Pesantren Indonesia [IPI] (2023 - Sekarang)

Karya Ilmiah[sunting | sunting sumber]

  • H.L.Guntur, W.Hendrowati. Scryptian NH.Zuhri (2020). Designing hydro magneto electric regenerative shock absorber for vehicle suspension considering conventional viscous shock absorber performance. Journal of Mechanical Science and Technology, Vol.34 (1), 55 – 67. 2020, KSME-Springer, 2020.[3]
  • H.L.Guntur, Listy Fazria S (2016). The influence of asymmetry ratio and average of the damping force on the Performance and ride comfort of a vehicle. International Journal Vehicle Systems Modelling and Testing, Vol. 11, No. 2, 2016.[4]
  • Albana, M.H., Guntur, H.L., Putra, A.B.K. (2023). The Effect of Rotational Speed on the Thermal Characteristics of a Wheel Hub Motor on an Electric Scooter. International Seminar on Intelligent Technology and Its Applications: Leveraging Intelligent Systems to Achieve Sustainable Development Goals, ISITIA- Proceeding, pp. 749–754. 2023.
  • Guntur, H.L., Nugraha, D.K. (2023). Ball Screw Regenerative Shock Absorber Design and Road Test for Small Class Multi Purposes Vehicle Suspension. Lecture Notes in Recent Advances in Mechanical Engineering, pp. 79–89.2023.[5]
  • Albana, M.H., Guntur, H.L., Putra, A.B.K. (2023). The effect of grooves on the in-wheel motor cover of an electric scooter to increase the heat transfer process[6], ICCoSITE 2023 - International Conference on Computer Science, Information Technology and Engineering: Digital Transformation Strategy in Facing the VUCA and TUNA Era, pp. 84–89.2023.
  • Hendrowati, W., Daman, A.A.A., Guntur, H.L., Darmawan, F.A. (2023). Analysis of Vibration Characteristics Due to the Effect of Adding Rubber Radial Vibratio Damper (RRVD) to the Boring Process, pp. 69–78., 2023.[7]
  • Putranto, R.D., Guntur, H.L., Mahartana, I.B.P.P. (2022). Upgrade a Commercial Scooter with Direct In-Wheel Drive System Based on Design and Optimization. Proceedings - 2022. 2nd International Conference on Electronic and Electrical Engineering and Intelligent System, ICE3IS 2022, 2022, pp. 40–45.2022.[8]
  • Yangindrajat, D., Guntur, H.L. (2022). Fuzzy Logic Control Strategy for Axial Flux Permanent Magnet Synchronous Generator in WHM 1.5KW. Proceedings - 2022 IEEE International Conference on Cybernetics and Computational Intelligence.CyberneticsCom 2022, pp. 439–444. 2022.[9]
  • Subekti, Guntur, H.L., Djanali, V.S., Syaifudin, A. (2022). Simulation and Dynamic System Modeling in an Elastically Supported Rigid Cylinder for Vibration Energy Harvesting. Lecture Notes in Electrical Engineering, 876, pp. 61–68. 2022.[10]
  • Pamuji, F.A., Danier, D., Soedibyo, Guntur H.L. et al. (2021). Application of Artificial Neural Network for Speed Control of BLDC Motor 90KW in Electrical Bus. Przeglad Elektrotechniczny, 97(6), pp. 1–9. 2021.[11]

Pranala luar[sunting | sunting sumber]

  1. ^ Wulandari, Trisna. "ITS Umumkan 20 Bakal Calon Rektor Periode 2024-2029". detikedu. Diakses tanggal 2023-11-08. 
  2. ^ "ASME Membership - ASME". www.asme.org (dalam bahasa Inggris). Diakses tanggal 2023-11-08. 
  3. ^ Guntur, Harus Laksana; Hendrowati, Wiwiek; Syuhri, Skriptyan N. H. (2020-01). "Designing hydro-magneto-electric regenerative shock absorber for vehicle suspension considering conventional-viscous shock absorber performance". Journal of Mechanical Science and Technology (dalam bahasa Inggris). 34 (1): 55–67. doi:10.1007/s12206-019-1205-1. ISSN 1738-494X. 
  4. ^ Guntur, Harus Laksana; Setiawan, Listy Fazria (2016). "The influence of asymmetry ratio and average of the damping force on the performance and ride comfort of a vehicle". International Journal of Vehicle Systems Modelling and Testing (dalam bahasa Inggris). 11 (2): 97. doi:10.1504/IJVSMT.2016.077924. ISSN 1745-6436. 
  5. ^ Guntur, Harus Laksana; Nugraha, Dhion Khairul (2022-08-19). Ball Screw Regenerative Shock Absorber Design and Road Test for Small Class Multi Purposes Vehicle Suspension. Singapore: Springer Nature Singapore. hlm. 79–89. ISBN 978-981-19-0866-8. 
  6. ^ Albana, Muhammad Hasan; Guntur, Harus Laksana; Putra, Ary Bachtiar Khrisna (2023-02-16). "The effect of grooves on the in-wheel motor cover of an electric scooter to increase the heat transfer process". 2023 International Conference on Computer Science, Information Technology and Engineering (ICCoSITE). IEEE. doi:10.1109/iccosite57641.2023.10127695. 
  7. ^ Hendrowati, Wiwiek; Daman, Aida Annisa Amin; Guntur, Harus Laksana; Darmawan, Fuad Adi (2022-08-19). Analysis of Vibration Characteristics Due to the Effect of Adding Rubber Radial Vibration Damper (RRVD) to the Boring Process. Singapore: Springer Nature Singapore. hlm. 69–78. ISBN 978-981-19-0866-8. 
  8. ^ Putranto, Rifki Dwi; Guntur, Harus Laksana; Mahartana, Ida Bagus Putu Putra (2022-11-04). "Upgrade a Commercial Scooter with Direct In-Wheel Drive System Based on Design and Optimization". 2022 2nd International Conference on Electronic and Electrical Engineering and Intelligent System (ICE3IS). IEEE. doi:10.1109/ice3is56585.2022.10010274. 
  9. ^ Yangindrajat, Demas; Guntur, Harus Laksana (2022-06-16). "Fuzzy Logic Control Strategy for Axial Flux Permanent Magnet Synchronous Generator in WHM 1.5KW". 2022 IEEE International Conference on Cybernetics and Computational Intelligence (CyberneticsCom). IEEE. doi:10.1109/cyberneticscom55287.2022.9865461. 
  10. ^ Subekti; Guntur, Harus Laksana; Djanali, Vivien S.; Syaifudin, Achmad (2022). Simulation and Dynamic System Modeling in an Elastically Supported Rigid Cylinder for Vibration Energy Harvesting. Singapore: Springer Nature Singapore. hlm. 61–68. ISBN 978-981-19-1580-2. 
  11. ^ PAMUJI, Feby (2022-02-04). "Application of Artificial Neural Network for Speed Control of BLDC Motor 90KW in Electrical Bus". PRZEGLĄD ELEKTROTECHNICZNY. 1 (2): 205–212. doi:10.15199/48.2022.02.47. ISSN 0033-2097.